High viscosity paste filling machine, paste quantitative filling machine equipment, cleaning work of paste chili sauce filling machine

High viscosity paste filling machine, paste quantitative filling machine equipment, cleaning work of paste chili sauce filling machine

Before operation, it is necessary to thoroughly clean with a non-woven soft cloth and cleaning agent to remove oil or dirt, and then dry with a non-woven soft cloth. According to GMP requirements, check whether the contact area between equipment and materials meets the corresponding cleanliness requirements. If it does not meet the requirements, clean and dry it again. The cleaning method is based on the process requirements.

The filling action of this machine is divided into automatic and manual modes. When the machine is manual, simply push the tongue with the bottle mouth to start suction. Be careful not to hold the tongue during filling. When using automatic mode, bottles must be placed under the discharge port first. Once the switch is turned to automatic mode, filling will begin immediately and bottles will be replaced in a timely manner. When unstable measurement is found during filling, it should be checked that there may be debris trapped in the feed check valve, resulting in poor sealing and affecting the filling volume. The leakage of material at the lower part of the cylinder indicates that the piston sealing ring is worn and needs to be replaced.